How to remove rust from tools
Your hand and power tools may be stored in a secure garage, workshop or shed but they’re not immune to rust. So, if you’ve found orange-brown specks and are wondering how rust developed on your expensive equipment, it’s likely something to do with the humidity or lack of insulation in the room. However, before you buy a dehumidifier or install insulation, use 3-IN-ONE Penetrant Spray to remove rust and protect your tools.
Whether you’re here for a quick reminder or to find out how to use penetrant for the first time – read on for step-by-step instruction.
Things you will need
-
- 3-IN-ONE® Penetrant Spray
- 2x clean cloths
- 3-IN-ONE® Multi-Purpose Oil
Step 1
Spray our Penetrant
Spray our penetrant over the rusted parts of your tools to penetrate and loosen seized parts, then leave to sink in for a couple of minutes.
Step 2
Wipe away the rust
Using a clean cloth, wipe away the rust.
Step 3
Lubricate and protect
Apply a couple drops of 3-IN-ONE Multi-Purpose Oil onto the metal parts of your tools, then wipe over with a clean cloth to lubricate and protect.
Removing rust and protecting your tools has never been easier thanks to 3-IN-ONE!
Browse our 3-IN-ONE formulas to find which maintenance tool is right for you, and visit our Amazon shop or one of our stockists to pick up your favourites!
The uses shown and described for 3-IN-ONE Products were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using 3-IN-ONE products. Always follow the instructions and take heed of any warnings printed on the packaging.
Related How Tos
Contact Us
© 2024 WD-40 Company.
All Rights Reserved